Credit: Chenchen Miao and Cijie Zhang

1. 利用 HPE 的 iLO 功能实现远程操作服务器 / operate the server remotely using HPE’s iLO

  1. 记下机箱标签上的 iLO 账号与密码 / remember username and password of iLO which is on the label of server
  2. 第一次启动需要接上屏幕, 在引导阶段会显示 iLO 的 IP 地址 / screen seems required on first boot, IP address of iLO will show when booting
  3. 用其他设备以 HTTP(S) 访问该地址, 以上述账号密码登录即可使用 iLO 远程操作与监控该服务器 / visit this address via HTTP(s) protocol using another device, and then login with username and password said above to operate and monitor this server remotely

2. 某些 RAID 卡的设置的位置 / Location of settings of some RAID card

  1. 启动时 F9 进入 System Utilities / press F9 when booting to enter System Utilities
  2. 其余见图 / further steps refer to these images